闽盛交通科技有限公司

灌缝机 > 园林机械设备 > 绿篱修剪机

绿篱修剪机

性能特点:

产品功率

运行速度

产品重量

  • 产品介绍
  • 技术参数
  • 相关视频
产品介绍
目前,高速公路中央绿化带基本上都采用人工修剪,或者用手持式绿篱机修剪,以上修剪有以下不足:人工修剪不安全、速度慢,劳动强度大,修剪高度不一致等等,高速公路中间隔离带树篱修剪养护,已成为管理部门的一大难题,据此,开发一种修剪效率高,使用灵活,修剪效果好,安全性强的机械化树篱修剪机,将深受用户的喜爱和市场的接纳。本设备就是针对目前高速公路中央隔离带人工修剪的不足而改进、设计的一种实用新型高速公路绿篱修剪车。
该绿篱修剪车主要用于高速公路、市政园林、城市绿化、茶园采剪等大幅度修剪工程!通过调节开关可形成平形、梯形、塔形等形状的修剪,修剪速度每小时10-30公里,大幅度的提高了工作效率,减少了劳动力或不安全因素,增强了修剪效果。
At present, the highway central green belts basically using artificial pruning, or use a handheld hedgerow machine clip, clip above has the following defects: artificial pruning unsafe, slow speed, the intensity of labor is big, pruning height not consistent, etc., highway barriers among hedge pruning maintenance, has become a big problem, the administrative department according to this, the development of a clip of high efficiency, flexible use, cutting effect is good, strong security the mechanization of the hedge trimmer, was deeply loved by the user and market acceptance.This equipment is a utility model highway hedge trimmer, which is improved and designed for the shortage of artificial pruning of the central separation belt of the highway.
The hedge trimmer is mainly used for highway, municipal gardens, city greening, tea garden and other large scale pruning projects!By adjusting the switch can be formed flat shape, trapezoid, tower shape and other shape of the pruning, pruning speed per hour 10-30 km, greatly improve the work efficiency, reduce labor or unsafe factors, enhance the pruning effect.
技术参数

  技术参数Technical parameters

项目project

参数parameter


割幅宽度Cutting width

1-3.0 1-3.0m

一次割幅宽度1.5

The width of each cut is 1.5m

修剪速度Cutting speed

10-30公里/小时

Repair 10-30 km/h


修剪高度Pruning height

0.2-2.5  0.2m-2.5m

平剪Flat cut

立剪高度Vertical shear height

0.6-3.0  0.6m-3.0m


修剪动力Cut the power

3.0千瓦3.0kw


发电机The generator

15千瓦15kw

单缸柴油机

Single cylinder diesel engine

旋转角度Rotation Angle

360 360°


操控(驾驶室)

Control (bridge)

控制箱全自动

Control box automatic

显示屏、摄像头

Display screen, camera

刀具旋转角度

Tool rotation Angle

120度±10

120°±10°


底盘chassis

用户自带车型

User's own model


外形尺寸(长**mm

Overall dimensions (length * width * height mm)

3500*1500*1600


体积volume

7.68立方米 7.68m³


整机重量The weight

730kg

加发电机950kg

Add 950kg of generator

  该修剪车由承载车、修剪机底盘、修剪装置、调节装置、液压操纵装置、警示装置、电气装置等。承载车:由一辆1.5吨轻型货车构成。修剪装置:由底盘、修剪机立臂、油缸、可调节角度刀具、刀片、修剪马达。 液压操纵装置:通过操纵在驾驶室仪表台上的控制手柄,由多路电磁阀控制液压装置,使本设备能够灵活的升降、水平收缩、轻便地完成水平修剪、垂直修剪、高低尺寸修剪等工作步骤。警示装置:包括驾驶室内的导向指示灯、警灯、警笛等组成。

  The trim truck is made up of load carrier, trim chassis, trim device, adjusting device, hydraulic control device, alarm device, electrical device, etc.Load carrier: one 1.5 ton light truck.Clip device: by chassis, clip machine vertical arm, oil cylinder, adjustable Angle cutter, blade, clip motor.Hydraulic control device: through controlling the control handle on the instrument table in the cab, the hydraulic device is controlled by multiple solenoid valves, which enables the equipment to rise and fall flexibly, contract horizontally, and conveniently complete the work steps such as horizontal trim, vertical trim and high-low size trim.Warning device: including the pilot light, warning light, siren, etc.


相关视频
no cache
Processed in 0.925307 Second.