建利日化
您现在的位置:产品首页 >> 小型灌缝机、清缝机、扩缝机 >> 大型灌缝机
  • 产品名称: 大型灌缝机
  • 产品编号: MS-06
  • 上架时间: 2016-07-03
  • 浏览次数: 88

KFJC-15型
利用本田发动机带动特制刀片高速旋转,完成对裂缝的开槽(扩缝),保证灌缝作业的顺利进行。整机结构紧凑,可靠高效;摇动手轮即可方便地调整进刀深度。
主要技术参数:
1、刀片直径:160mm;
2、刀片厚度:6mm;
3、刀片数量:1~3片
4、主轴转速:3500r/min
5、自带除尘功能(有效的解决开槽灰尘大的问题)
 
操作要领
1、打开点火开关,启动发动机(冷车应关阻风门,热车后再全开),保持中速油门,空转预热2~3分钟;
2、将锯片对准水泥缝,旋转手轮,根据扩缝深度调整好标尺高度,同时拉着机器往后退,使锯片插入水泥缝隙,进行扩缝作业;  
3、清缝的深度和速度可由作业者灵活掌握;
4、作业收工时,摇转手轮,让锯片升起离开水泥路缝隙,然后关掉点火开关,使发动机熄火;
5、扩缝操作要不断摸索,才能达到既快又好的效果。
 

Product name: large irrigation sewing machine

Product number: MS8

KFJC - 15 type

With Honda engine driving a special blade, high speed rotation of cracks slot (seam), and ensure the smooth progress of filling and sewing operation. The machine has compact structure, reliable and efficient. Shake hand wheel feed depth can be changed easily.

The main technical parameters:

1. the blade diameter: 160 mm;

2.the blade thickness: 6 mm;

3.the number of blades: 1 ~ 3;

4.spindle speed: 3500 r/min;

5. with dust removal function (effective solve the problem of large slotted dust);

Operating essentials

1.turn the ignition switch and start the engine (cold car should GuanZu damper, hot car again after full open), medium speed throttle, idling preheating 2 ~ 3 minutes;

2. aim the saw blade cement seam, rotate handwheel, adjust scale height, according to the depth of the expansion joint and pull back to the machine, make the saw blade inserted into the concrete crack, expansion joint operations;

3.the depth of the crack-cleaning and speed can be held by the operators flexible;

4.homework was done, shake hands round, let rose saw blade left by cement crack, and then turn off the ignition switch, make the engine.